Setting Up The Printer - Intermec EasyCoder 501XP Programmer's Reference Manual

Chapter 3 — Principles of Operation
• Rotating the platen roller during cleaning
• Feeding out an empty label, ticket, tag, or piece of strip
• Adjusting the label stop/black mark sensor

3.11 Setting Up the Printer

You can control how the printer will work, for example:
• Enable/disable Intermec Direct Protocol
• Select standard IN and OUT channels
• Set the printer's clock/calendar
• Set formats for the printing of date and time
• Set separators for input data strings to predefi ned layouts
• Create label counters
• Enable/disable the optional label taken sensor
• Enable/disable automatic cut-off operation
• Enable/disable Print key
• Produce audible signals
• Format the printer's permanent memory or a memory card
• Remap certain incoming characters
• Select character set
• Restart the printer
• Select verbosity level
• Select type of error message
• Enable error handling and create customized error messages
• Select method for breaking the printing of a batch of labels
• Change the printer's setup
Intermec Direct Protocol v7.80 Programmer's Reference Manual 17