Intermec EasyCoder 501XP Programmer's Reference Manual page 128

Chapter 11 — Error Messages
Code Message/Explanation
1223 Single byte map table is missing.
1224 Character map function is missing.
1225 Double byte font is not selected.
1301 Index outside collection bounds.
1302 Collection could not be expanded.
1303 Parameter is not a collection.
1304 Item not a member of the collection.
1305 No compare function, or compare returns
faulty value.
1306 Tried to insert a duplicate item.
1601 Reference Font Not Found.
1602 Error in Wand-Device.
1603 Error in Slave Processor.
1604 Print Shift Error.
1605 No Hardware Lock.
1606 Testfeed not done.
1607 General Print Error.
1608 Access Denied.
1609 Specifi ed Feed Length Exceeded.
1610 Illegal Character Map File.
1701 Cutter Error1 (EasyCoder F-series only)
1702 Cutter Error2 (EasyCoder F-series only)
1703 Cutter Error3 (EasyCoder F-series only)
1704 Cutter open (EasyCoder F-series only)
122 Intermec Direct Protocol v7.80 Programmer's Reference Manual