Image Field - Intermec EasyCoder 501XP Programmer's Reference Manual

4.5 Image Field

An image fi eld is a fi eld containing some kind of picture or logotype in
.PCX format. The image can either be stored in the permanent memory
or in a memory card, or be downloaded as a fi le by means of an
instruction, see Chapter 8.5.
LOAD
In addition to the general formatting instructions
, an image fi eld can contain the following instructions:
DIR
Select an Image
An image is selected by the full name under which it is stored in the
printer's memory, either as plain text or as a variable (also see Chapter
4.9).
PRIMAGE | PM "<image name>"
<image name>
Default:
The Fingerprint image name convention includes an extension (.1 or .2),
where .1 indicates that the image is intended for print directions 1 and
3, whereas .2 indicates print directions 2 and 4. For example, the image
"GLOBE.1" is suited for directions 1 and 3.
Select Magnifi cation
Images can be magnifi ed 1-4 times independently in regard of height and
width by means of a
MAG <height mag>,<width mag>
<height mag>
<width mag>
Default:
Reset to default by:
To obtain the best printout appearance, use a larger image rather than
magnifying a smaller one.
Intermec Direct Protocol v7.80 Programmer's Reference Manual
is the full name of the image incl. extension, enclosed by quotation marks.
None
instruction.
MAG
is the magnifi cation factor 1, 2, 3, or 4 times in regard of height.
is the magnifi cation factor 1, 2, 3, or 4 times in regard of width.
1,1
PRINTFEED (PF)
Chapter 4 — Label Design
IMAGE
, , and
PRPOS ALIGN
37