Intermec EasyCoder 501XP Programmer's Reference Manual page 131

Instruction
DATE$
DATEADD$
DIR
ERROR
FIELDNO
FILE& LOAD
FILES
FONT (FT)
FONTD
FONTS
FORMAT
FORMAT DATE$
FORMAT INPUT
FORMAT TIME$
Intermec Direct Protocol v7.80 Programmer's Reference Manual
Chapter Purpose
4.9, 6.3, 7.3 Setting or returning the current date.
4.9 Returning a new date after a number of days
have been added to, or subtracted from, the
current date or optionally a specified date.
4.2 Specifying the print direction.
6.17 Defining error messages and enabling the
error handler for specified error conditions.
5.3 Getting the current field number for partial
clearing of the print buffer by a CLL instruc-
tion.
8.4 Reception and storing of binary files in the
printer's permanent memory
8.1 Listing the files stored in one of the printer's
directories to the standard OUT channel.
4.3 Selecting a single-byte font for the printing
of the subsequent PRTXT instructions, and
specifying size, slant, and width.
9.2 Selecting a double-byte font for the printing
of the subsequent PRTXT instructions, and
specifying size, slant, and width.
8.1 Returning the names of all bitmap fonts
stored in the printer's memory to the standard
OUT channel.
6.11 Formatting the printer's permanent memory,
or formatting a SRAM-type memory card to
MS-DOS format.
6.4 Specifying the format of the string returned
by DATE$("F") and DATEADD$(...,"F")
instructions.
6.5 Specifying separators for the LAYOUT RUN
instruction.
6.4 Specifying the format of the string returned
by TIME$("F") and TIMEADD$(...,"F")
instructions.
Chapter 12 — Reference Lists
125