Bar Code Field - Intermec EasyCoder 501XP Programmer's Reference Manual

Chapter 4 — Label Design

4.4 Bar Code Field

The Intermec Direct Protocol supports 53 of the most common bar code
symbologies. 38 of these bar code symbologies are standard, whereas
15 are available as a dynamic module (see Intermec Fingerprint v7.80,
Programmer's Reference Manual). Each bar code (optionally including its
human readable interpretation) makes up a bar code fi eld. In addition to
the general formatting instructions
4.2), a bar code fi eld can contain the following instructions:
Select Bar Code Type
The type of bar code is specifi ed by a
abbreviation of the bar code name.
BARTYPE | BT "<bar code name>"
<bar code name>
Default:
Reset to default by:
Bar Codes
Codabar
Code 11
Code 16K
Code 39
Code 39 full ASCII
Code 39 w. checksum
Code 49
Code 93
Code 128
Code 128 subset A
Code 12 subset B
Code 128 subset C
Data Matrix (dynamic module only)
DUN-14/16
EAN-8
EAN-8 Composite with CC-A or CC-B (dynamic module only)
EAN-13
32 Intermec Direct Protocol v7.80 Programmer's Reference Manual
PRPOS
is the designation of the bar code type according to the list below.
"INT2OF5"
PRINTFEED (PF)
, , and
ALIGN
instruction containing an
BARTYPE
(see Chapter
DIR
Designation
"CODABAR"
"CODE11"
"CODE16K"
"CODE39"
"CODE39A"
"CODE39C"
"CODE49"
"CODE93"
"CODE128"
"CODE128A"
"CODE128B"
"CODE128C"
"DATAMATRIX"
"DUN"
"EAN8"
"EAN8_CC"
"EAN13"