Chapter 4 — Label Design
UPC-A Composite with CC-A or CC-B (dynamic module only)
UPC-D1
UPC-D2
UPC-D3
UPC-D4
UPC-D5
UPC-E
UPC-E Composite with CC-A or CC-B (dynamic module only)
UPC Shipping Container Code
Specify Bar Code Height
The height of the bars that make up the bar code can be specifi ed using
the
instruction.
BARHEIGHT
BARHEIGHT | BH <height>
<height>
Default:
Reset to default by:
Specify Bar Code Ratio
The ratio between the wide and the narrow bars can be set using a
instruction.
RATIO
BARRATIO | BR <wide bars>,<narrow bars>
<wide bars>
<narrow bars>
Default:
Reset to default by:
Specify Bar Code Magnifi cation
The magnifi cation of the bar code and the bar code ratio decide the
actual thickness of the bars. For example, if
is 2, then the wide bars will be 6 dots thick (3×2) and the narrow bars
will be 2 dots (1×2). Magnifi cation also affects interpretations that are
integrated in the code, for example EAN and UPC codes.
BARMAG | BM <magnifi cation>
<magnifi cation>
Default:
Reset to default by:
34
Intermec Direct Protocol v7.80 Programmer's Reference Manual
is the height of the bars in dots.
100
PRINTFEED (PF)
is a relational factor wide bars vs narrow bars
is a relational factor narrow bars vs wide bars
3:1
PRINTFEED (PF)
is the enlargement of the bar code pattern.
2
PRINTFEED (PF)
"UPCA_CC"
"UPCD1"
"UPCD2"
"UPCD3"
"UPCD4"
"UPCD5"
"UPCE"
"UPCE-CC"
"UPCSCC"
is 3:1 and
BARRATIO
BAR-
BARMAG