Intermec EasyCoder 501XP Programmer's Reference Manual page 134

Chapter 12 — Reference Lists
Instruction
REMOVE IMAGE/FONT 8.2
REPRINT ON/OFF
SETSTDIO
SETUP
SOUND
SYSVAR
TESTFEED
TIME$
TIMEADD$
VERSION$
WEEKDAY$
WEEKNUMBER
XORMODE
128 Intermec Direct Protocol v7.80 Programmer's Reference Manual
Chapter Purpose
Removing a specified image or bitmap font
from the printer's memory.
5.3 Enabling/disabling reprinting.
6.2 Selecting standard IN and OUT communi-
cation channel.
6.19 Entering the printer's Setup Mode, changing
the setup by means of a setup file or setup
string, or creating a setup file containing the
printer's current setup values.
6.10 Making the printer's beeper produce a sound
specified in regard of frequency and duration.
6.15, 6.16, Reading or setting various system variables.
6.20-6.23,
7.5-7.7
5.1 Performing a formfeed to allow the label stop
sensor to adjust itself according to the pres-
ently loaded media.
4.9, 6.3, 7.3 Setting or returning the current time.
4.9 Returning a new time after a number of sec-
onds have been added to, or subtracted from,
the current time or optionally a specified
time.
7.9 Returning the version of the firmware, printer
family, or type of CPU board
4.9 Returning the name of the weekday from a
specified date.
4.9 Returning the number of the week for a
specified date.
4.2 Controlling printing of intersection fields.