Setting Up The Test Software-Only Gateway Environment; Installing The Client Environment And Simulator - Intermec 5020 User Manual

Setting Up the Test Software-Only Gateway Environment

Installing the Client Environment and Simulator

Data Collection Browser User's Guide
Use the test/software-only gateway environment to simulate running the
HTML application on your PC.
Minimum Requirements
• PC (not provided by Intermec)
• Intel-based, Pentium
• 32 MB RAM
• 10 MB available hard disk space
• Screen must use a VGA device
• CD-ROM drive
• Windows NT/2000/ME/XP
• web server
• web browser—Internet Explorer 4.0 or later/Netscape Navigator 4.5 or
later (not provided by Intermec)
• dcBrowser simulator (on dcBrowser client CD)
Note: A free web server is provided in INTERMEC\DCBROWSER\
DEVTOOLS. Intermec does not provide product support for the server.
For help installing the web server, see the README.TXT.
To set up the test/software-only gateway environment
1 Load a web server and a web browser on your PC. For help, see the
documentation that came with your web server and web browser.
2 Load the dcBrowser simulator on your PC. For help, see the next
section, "Installing the Client Environment and Simulator." This
manual assumes that you keep the default directory and directory
structure.
3 Verify that your test environment works by running the sample
application and web pages. For help, see
Application and Web Pages (Optional)" on page
4 Copy your application and web pages to the appropriate directories on
the web server. For help, see
The dcBrowser simulator ships on each dcBrowser client CD-ROM. You
can also download dcBrowser from the Intermec web site at
www.intermec.com.
To load the simulator
1 Place the dcBrowser client CD into the CD-ROM drive on your
Windows NT/2000/ME/XP computer.
Chapter 2 — Developing and Testing Your Application
"Setting Up the Sample
"Testing Your Application" on page
31.
35.
29