Table of Contents
Advertisement
Make sure the Use Network Time Protocol? checkbox is unchecked.
Step 1
Set the current date and time using the drop-downs for Month, Day, and Year as well as Hour, Minute,
Step 2
Seconds, and AM/PM.
To save, click on Apply.
Step 3
Figure 2-66 Time Service - Manual Setup
To set time zone and daylight saving time (DST) settings:
Step 1
In the Time Zone drop-down, select the correct time zone based upon Greenwich Mean Time (GMT).
Using the Which, Day, in Month drop-downs, set the start and end dates for daylight saving time.
Step 2
To save, click on Apply.
Step 3
Figure 2-67 Time Service - Time Zone/Daylight Saving Time Setup
Time Zone Tips:
In the U.S. the following time zones are in effect:
–
–
–
–
Daylight Saving Time Tips:
For most of the United States, Daylight Saving Time in the United States begins at 2 a.m. on the second
Sunday of March, and ends at 2 a.m. on the first Sunday in November.
Additionally, for those US regions that do not observe DST, the start and end dates in the Which, Day,
in Month settings, should be set to the exact same date.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
2-40
Eastern Standard Time = GMT –5
Central Standard Time = GMT –6
Mountain Standard Time = GMT –7
Pacific Standard Time = GMT -8
OL-8787-05
Advertisement
Table of Contents
