Table of Contents
Advertisement
Syntax:
ismAutoClearConf [disable | enable [warn] [log_first]]
Options:
-enable
Enable the auto-clear feature.
-disable
Disable the auto-clear feature.
-warn
Generate warning log messages instead of the default information messages.
-log_first
Log first clear (otherwise the first clear is not logged).
Sample Output:
-> ismAutoClearConf enable
Auto clear is enabled
Note
ismPortSet12x
This command is not currently supported.
Note
Allows the user to view, set and unset port link width to 12X for specific port(s).
Syntax:
ismPortSet12x portName [enable12xBit]
Options:
-portName
A valid 6 or 7 character port name (e.g., S1AL01a or L01P01).
-enable12xBit
1=enable, 0=disable.
Sample Output:
-> ismPortSet12x S1AL01a
S1AL01a 12x mode is DISABLED
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-60
This feature will log every time a counter has reached its maximum capacity. This may be useful
for diagnostics purposes, specifically for bad cables. This feature is only available on certain
switch hardware platforms.
OL-8787-05
Advertisement
Table of Contents
