Table of Contents
Advertisement
Sample Output:
-> smShowSMParms
SM priority is set to 0
SM LMC is set to 0
SM sweep rate is set to 300
SM max retries on receive set to 3
SM max receive wait interval set to 250 millisecs
switchLifetime set to 13
HoqLife set to 11
VL Stall set to 7
packetLifetime constant is set to 18
Dynamic PLT ON using values: 1 hop=16, 2 hops=17, 3 hops=17, 4 hops=18,
5 hops=18, 6 hops=18, 7 hops=18, 8+hops=19
MasterSpine1->
NOTES: Use this command to display a sampling of subnet manager parameters.
smSetPKey
Configure a PKey in the PKey table.
Syntax:
smSetPKey [index] [pkey] [description]
Options:
index
PKey index.
pkey
Pkey 16 Bit value.
description
User-defined description of the PKey.
Sample Output:
-> smSetPKey 0 0xffff "Default PKey"
Successfully set PKey index: 0 to 0xffff
NOTES: PKeys are used for partitioning the subnet. Only configure PKeys if the host driver
supports this. Invalid configuration of the PKey may render the fabric inoperable.
smShowPKeys
Displays all of the PKeys within the PKey table of the subnet manager.
Syntax:
smShowPKeys
Options:
None.
OL-8787-05
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-45
Advertisement
Table of Contents
