Cisco SFS 7012 Hardware User's Manual page 145

Sample Output:
-> logResetToDefaults
Log configuration has been reset
logSyslogConfig
Configure the syslog host IP address.
Syntax:
logSyslogConfig [-h xxx.xxx.xxx.xxx] [-p xxxx] [-f xx]
Options:
-h ip_address
Sets the host IP address in dotted decimal format (xxx.xxx.xxx.xxx).
-p port
The host port number on which the syslog server is listening.
-f facility
The syslog facility to use in the messages.
Sample Output:
-> logSyslogConfig -h 172.26.0.202
Successfully configured the syslog host
NOTES: The device can forward its log messages to a syslog host if configured. This command
allows a user to configure the host and port to send messages to and the facility to use in the
messages. Additional configuration may be necessary to fully configure the log system.
logShowConfig
Display the current log configuration settings.
Syntax:
logShowConfig
Options:
None.
OL-8787-05
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-53