Cisco SFS 7012 Hardware User's Manual page 107

setldapSvrPort
Modify the LDAP Server Port.
Syntax:
setldapSvrPort [port]
Options:
[port]
The Port of the ldap server you wish to set to authenticate.
Sample Output:
-> setldapSvrPort 1
NOTES: This sets the LDAP server port. The LDAP server will be contacted for remote
authentication.
idleTimeoutGet
Get the CLI and Chassis Viewer GUI idle timeout values.
Syntax:
idleTimeoutGet
Options:
None.
Sample Output:
-> idleTimeoutGet
CLI timeout is 600 seconds.
GUI timeout is 0 seconds.
idleTimeoutSet
Set idle timeout settings.
Syntax:
idleTimeoutSet [--all | --cli | --gui] seconds
Options:
[--all]
Set the idle timeout for both the CLI and the GUI to the same value.
[--cli]
Set the idle timeout for only the CLI. This is the default if no identifier is specified.
[--gui]
Set the idle timeout for only the GUI.
OL-8787-05
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-15