Table of Contents
Advertisement
Note
ismChassisSetEnable
Allows the user to view ports for the entire hemisphere, to disable all the leaf-cable ports in a
hemisphere, and to enable all ports (leaf-cable and leaf-spine) in a hemisphere. If [enable] is set to
1, all ports in the hemisphere will be enabled. If [enable] is set to 0, all leaf-cable ports will be
disabled.
Syntax:
ismChassisSetEnable [enable]
Options:
-enable
1=enable, 0=disable.
Sample Output:
-> ismChassisSetEnable
L01P01
L01P02
L01P03
L01P04
L01P05
L01P06
L01P07
Note
ismPortDisable
Allows the user to view and disable ports for entire chassis.
Syntax:
ismPortDisable port
Options:
-port
Port name.
Sample Output:
-> ismPortDisable S3BL10a
OL-8787-05
The option portName is case sensitive. If it contains spaces, it must be bounded by quotes (e.g.,
ismPortEnable "Cable 1"). A reboot is required to activate changes made with this command.
This reboot will be disruptive and will cause the affected switch chips to be reset and have a part
of their EEPROM to be reloaded.
is ENABLED
is ENABLED
is ENABLED
is ENABLED
is ENABLED
is ENABLED
is ENABLED.
Using this command without the enable option displays current value of the port(s). A reboot is
required to activate changes made with this command. This reboot will be disruptive and will
cause the affected switch chips to be reset and have a part of their EEPROM to be reloaded.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-63
Advertisement
Table of Contents
