Table of Contents
Advertisement
ismChassisSetSpeed
Allows the user to view and set port link speeds (including external ports) for the entire chassis to
2.5 (SDR), 5.0 (DDR) or AutoNegotiate.
Syntax:
ismChassisSetSpeed [speed]
Options:
-speed
1=2.5, 2=5.0 or 3=AutoNegotiate.
Sample Output:
-> ismChassisSetSpeed
L01P01
L01P02
L01P03
L01P04
L01P05
L01P06
L01P07
L01P08
Note
Note
ismPortEnable
Allows the user to enable or disable a port.
Syntax:
ismPortEnable port
Options:
-port
Port name.
Sample Output:
-> ismPortEnable S3BL08b
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-62
link speed is AUTO NEGOTIATE
link speed is AUTO NEGOTIATE
link speed is AUTO NEGOTIATE
link speed is AUTO NEGOTIATE
link speed is AUTO NEGOTIATE
link speed is AUTO NEGOTIATE
link speed is AUTO NEGOTIATE
link speed is AUTO NEGOTIATE
DDR links (5.0) are only available on chassis supporting DDR. This command sets link speeds
for both internal and external ports .Each external DDR port must be connected to another DDR
port to establish a 5.0 link. Using this function without the speed option displays the current
values of the port(s).A reboot of the chassis is required to activate changes made with this
command.
This command requires a reboot of the affected chassis component. This reboot will be
disruptive and will cause the affected switch chips to be reset and have a part of their EEPROM
to be reloaded.
OL-8787-05
Advertisement
Table of Contents
