Table of Contents
Advertisement
smShowPriority
Get the priority of the embedded subnet manager.
Syntax:
smShowPriority
Options:
None.
Sample Output:
-> smShowPriority
The SM Priority is 0
NOTES: Use this command to display the priority of the subnet manager.
smSetPriority
Set the priority of the embedded subnet manager.
Syntax:
smSetPriority
Options:
None.
Sample Output:
-> smSetPriority 0
The SM Priority has been set to 0
NOTES: Use this command to set the priority of the subnet manager. Valid values are 0-15.
smSetSweepRate
Set the sweep rate of the embedded subnet manager.
Syntax:
smSetSweepRate
Options:
None.
Sample Output:
-> smSetSweepRate 300
The SM sweep rate has been set to 300 seconds
OL-8787-05
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-37
Advertisement
Table of Contents
