Table of Contents
Advertisement
Figure 2-25 Log System Configurator: Preset Tab
To change the log level settings:
Click the On-Off checkbox to the right of the setting(s).
Step 1
Click the Submit button to save any changes.
Step 2
Syslog Tab
Figure 2-26 Log System Configurator: Syslog Host Tab
The Syslog tab allows the user to configure logging messages to be sent to a syslog host. If the Host IP
address is 0.0.0.0, no syslog host is configured, otherwise log messages are sent to the syslog server at
a specified IP address and port.
To setup the syslog host:
Step 1
In the Host IP dialog box, enter the IP address of the syslog host where the log files are to be saved.
Click the Apply button to save the IP address.
Step 2
Configure Syslog on a Linux Server
Edit the /etc/sysconfig/syslog file and ensure that the -r is included in the
Step 1
SYSLOGD_OPTIONS. This allows logging from a remote system. For example:
Step 2
Type /etc/init.d/syslog restart, and press Enter.
OL-8787-05
SYSLOGD_OPTIONS="-r -m 0"
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
2-15
Advertisement
Table of Contents
