Note
ismPortSetSpeed
Allows the user to view and set port speeds.
Syntax:
ismPortSetSpeed port [speed]
Options:
-port
Port name.
-speed
The port speed (1=SDR, 2=DDR, 3=AutoNegotiate).
Sample Output:
-> ismPortSetSpeed S3BL08b
S3BL08b link speed is AUTO NEGOTIATE.
Note
ismIslSet12x
Allows the user to view, set and unset the chassis link width to 12X (except external ports).
Syntax:
ismIslSet12x [enable12xBit]
Options:
-enable12xBit
1=enable, 0=disable.
Sample Output:
-> ismIslSet12x.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-64
The option port is case sensitive. If it contains spaces, it must be bounded by quotes (e.g.,
ismPortEnable "Cable 1"). A reboot is required to activate changes made with this command.
This reboot will be disruptive and will cause the affected switch chips to be reset and have a part
of their EEPROM to be reloaded.
The option port is case sensitive. If it contains spaces, it must be bounded by quotes (e.g.,
ismPortSetSpeed "Cable 1"). Using this command with only the port option displays its current
values. A reboot is required to activate changes made with this command. This reboot will be
disruptive and will cause the affected switch chips to be reset and have a part of their EEPROM
to be reloaded.
OL-8787-05