Table of Contents
Advertisement
NOTES: Changing the chassis IP address will drop the connection to the CLI if not using the
console port, and may cause the device to become unreachable.
showDefaultRoute
Displays the default gateway IP address.
Syntax:
showDefaultRoute
Options:
None.
Sample Output:
-> showDefaultRoute
Gateway IP Address: 172.26.0.254
NOTES: This is the IP address for the default gateway to route packets from the OOB mangement
port to an external network.
setDefaultRoute
Change the default gateway IP address.
Syntax:
setDefaultRoute -h ipaddress
Options:
-h ipaddress
The default gateway IP address in dotted decimal format (xxx.xxx.xxx.xxx).
Sample Output:
setDefaultRoute -h 172.26.0.235
NOTES: This allows the user to configure the IP address for the default gateway to route packets
from the OOB management port to an external network.
arpShow
Displays the contents of the ARP table.
Syntax:
arpShow
Options:
None.
OL-8787-05
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
B-27
Advertisement
Table of Contents
