Table of Contents
Advertisement
•
•
LEDs and Sensors Tab
The LEDs and Sensors tab displays:
•
•
Figure 2-18 LEDs and Sensors Tab
For a detailed explanation of physical LEDs on the hardware components, please refer to the section
Note
7012 Component LEDs, page
System Tab
The System tab displays the overall system information of the SFS 7012. This information includes the
following items:
Out of Band LAN IP
Netmask
System Description
IB Node Description
Note
OL-8787-05
Fan information
Switch backplane information
Switch component LED information for chassis status, chassis SMA, fan and power supplies.
Slot-based temperature and AC-power sensor data for the internal switching complex.
1-28.
The IP address of the switch.
The current net mask settings for the chassis.
A read-only textual description of the system.
Assigned by the administrator, the IB node description is an IB fabric-applicable name that will be
displayed within a subnet manager GUI. Note that changes to this field will be visible to the outside
systems only after the chassis is rebooted. To reset this field to the default setting, click the Field
Default button.
If the IB Node Description field has been changed since the last reboot of either spine, the next
reboot will be treated as disruptive.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
SFS
2-9
Advertisement
Table of Contents
