Yamaha DPX-530 Service Manual page 32

DPX-530
* Projected image
29. White / black signal
Adjustment with Microsoft
1. Starting

1. Start Windows 95/98/Me/XP.
2. Select [Start] - [Programs] - [Accessories] -
[Communications] - [Hyper Terminal] in order to
display the Hyper Terminal window.
Note: You can select [Hyper Terminal] after
[Accessories] in Windows
2. Hyper terminal setting
1. Double-click [hypertrm.exe] on the Hyper
Terminal window.
[Connection Properties] window will open.
Set this window as shown on the right.
2. Click [Call] in the communication menu of the
window to access this projector.
3. Adjustment
Enter the adjustment command and the adjustment
value on the Hyper Terminal window in capital
alphanumeric letters with keyboard and press the
enter key.
4. Writing the adjustment value
The adjustment value entered using the above-
mentioned procedure will be saved in EEPROM
automatically.
5. Close the window
Click the closing button placed at the upper right-
hand corner of the window to close the Hyper
Terminal.
Close all the opening windows before closing

Windows 95/98/Me/XP.
32
® Windows ®

95.
Connect using
Port settings
Settings
ASCII setup
30. SMPTE (White)
95/98/Me/XP operating system
Item
Port (COM1-COM4)
: Bits per second 9600
: Data bits 8 bit
: Parity None
: Stop bits 1
: Flow control None
: Emulation VT100
: ASCII Sending Send line ends with line feeds
Echo typed characters locally
Line delay
Character delay : 10 milliseconds
: ASCII Receiving Append line feeds to incoming line ends
Setting
: 400 milliseconds