Power And Relay Connector - Cisco Catalyst 2955 Hardware Installation Manual

Connector Specifications
Warning
Warning

Power and Relay Connector

Catalyst 2955 Hardware Installation Guide
B-4
Figure B-4 100BASE-LX SM Port Connector
Invisible laser radiation may be emitted from disconnected fibers or
connectors. Do not stare into beams or view directly with optical instruments.
Statement 1051
Class 1 laser product. Statement 1008
For SM connections, use one of the LCs listed in
numbers in Table B-2
Table B-2 LC Patch Cables for 100BASE-LX Connections
Type
2-meter, LC-to-SC single-mode cable
8-inch, SC-to-LC single-mode cable
10-foot, LC-to-SC single-mode cable
100-foot, LC-to-SC single-mode cable
25-foot, LC-to-SC single-mode cable
50-foot, LC-to-SC single-mode cable
75-foot, LC-to-SC single-mode cable
The power and relay connector is a pluggable-screw terminal block connector that
provides power and return connections for both the primary and secondary power
supplies. The power and relay connector also gives the Catalyst 2955 switch the
interfaces to two independent alarm relays.
to order the connectors that you need.
Appendix B Connectors and Cables
Table B-2. Use the Cisco part
Cisco Part Number
CAB-CP-LCSC-2M
CAB-CP-SCLC-8IN
CAB-SMF-SC-10
CAB-SMF-SC-100
CAB-SMF-SC-25
CAB-SMF-SC-50
CAB-SMF-SC-75
78-14944-03