Cisco Catalyst 2955 Hardware Installation Manual page 113

Chapter 3 Installation
Figure 3-23
1
2
3
4
Use a ratcheting torque flathead screwdriver to torque the power and relay
Step 4
connector captive screw (above the installed wire leads) to 4.5 in-lbs. (72 ozf-in.).
(See
78-14944-03
Inserting Relay Wires into the Power and Relay Connector
1
2
3
Power supply A positive
connection
Power supply A return
connection
External device 1, relay wire A
connection
External device 2, relay wire A
connection
Figure 3-24 for details.)
Wiring the External Alarm Device Relays
4
5
6
7
8
5 External device 2, relay wire B
connection
6
External device 1, relay wire B
connection
7 Power supply B return
connection
8 Power supply B positive
connection
Catalyst 2955 Hardware Installation Guide
3-49