Power Connectors; Internal Power Supply Connector - Cisco Catalyst 2950 Hardware Installation Manual

Chapter 2 Overview
Figure 2-26 Catalyst 2950ST-8 LRE Switch, Catalyst 2950ST-24 LRE, and Catalyst 2950ST-24 LRE 997
Switch Rear Panel
Fans

Power Connectors

Internal Power Supply Connector

Note
78-11157-05
RPS
connector
You can provide power to a switch by using the AC internal power supply, the
DC-input power source, or the Cisco RPS.
The internal AC power supply is an autoranging unit that supports input voltages
between 100 and 240 VAC. Other than for the Catalyst 2950G-24-EI-DC and the
Catalyst 2950ST-24 LRE 997 switches, use the supplied AC power cord to
connect the AC power connector to an AC power outlet.
The AC power connector is on the front panel of the Catalyst 2950ST-8 LRE and
Catalyst 2950ST-24 LRE switches.
You can order these L-shaped AC power cords from your Cisco sales
representative:
• CAB-NP1200-AC-AR=
• CAB-NP1200-AC-AU=
CAB-NP1200-AC-CH=
•
• CAB-NP1200-AC-EU=
CAB-NP1200-AC-IT=
•
Catalyst 2950 Desktop Switch Hardware Installation Guide
Rear-Panel Description
2-29