Cisco Catalyst 2955 Hardware Installation Manual page 169

Chapter 4 Installation in a Hazardous Environment
Do not overtorque the power and relay connector captive screws. The
Caution
recommended maximum torque is 4.5 in-lbs.
Figure 4-14
1
Repeat
Step 5
external alarm device into the two connections labeled A2.
78-14944-03
Torquing the Power and Relay Connector Captive Screws
Power and relay connector captive screws
Step 1 through Step 4
Wiring the External Alarm Device Relays
1
to insert the input and output wires of an additional
Catalyst 2955 Hardware Installation Guide
4-35