Ii - System Features; Unpacking Instructions; Components; Specifications - Guardian R1000 Operation Manual

II – System Features

Unpacking Instructions

Open the carrying case on a level surface by lifting each latch
upward. Because the case is air- and water-tight, it may be necessary
to release pressure before the case can be opened. To do so, rotate the
pressure release value (the round knob located under the case handle),
counter-clockwise to release pressure. Remove the Guardian Reader
and power adaptor. Place the Reader on a level surface.

Components

Each Guardian Reader purchase includes the following items:
• Test Strip Reader
• Watertight, impact-resistant carrying case with pressure release
valve
• 120-240V International power adapter
• Laminated Quick Reference Instructions w/ Flow Chart
• Operating Manual
• Two (2) rolls of thermal printer (2.25" wide x 24' long, 1"
diameter), contact Alexeter for re-ordering information.

Specifications

Physical Characteristics:

Dimensions: 11 x 9.5 x 3 in.
Weight: 3.5 lbs.
Power supply: The power supply is considered an Installation Cat-
egory II.
Model: Power Supply, Universal 6VDC. Model HUP15A-10-
1B2. Manufactured by International Power Sources.
Voltage range: 100-240. Frequency: 47 – 63 Hz. Sup-
ply current: 2 amps.
Chapter
2
Page 8