Replacing AWS Celsius 420
•
Pay attention to the fiber optic cables (connections between Brick and PCI card). These
cables and plugs should be handled with care
Fig. 40: AWS
•
Remove the dongle from the old computer and attach it to the new one
(1/Fig. 40 / p.
•
Connect the connecting cables to the new computer.
•
Software installation:
The "WH AWS Software Reinstallation" chapter in the technical documentation
"Software, System WH AWS, SPB7-250.816...." (depending on installed WH AWS
version) describes the steps necessary for installing the software.
You can refer to the "Start-up, WH AWS(SPB7-250.815.02..)" if not all settings have
been backed up and some settings are missing after the restore operation.
Final steps
Perform a test exposure with a phantom.
Siemens AG
Medical Solutions
63).
SPB7-250.841.01.04.02
05.05
(1/Fig. 39 / p.
62).
MAMMOMAT Novation DR
Page 63 of 64
CS SD 24
63
0