Final Work Steps; Installing All Cover Panels And Ground Wire Check; Function Test; Recordings - Siemens ARCADIS Installation And Startup Manual

Hide thumbs Also See for ARCADIS:
Table of Contents

Advertisement

WLAN Configuration

Final Work Steps

Installing all Cover Panels and Ground Wire Check

Following a successful initial test of the WLAN network connection, install all cover pan-
els and perform a check of the ground wire resistance.

Function Test

Switch off the system.
Then switch on the system again and wait for it to boot up.
Test the WLAN connection in the vicinity of a customer access point. To do this, access
the DICOM nodes set up in the system (transmit / print / receive).
Test the WLAN connection to all user locations that were specified by the user by
accessing the DICOM nodes that have been set up (transmit / print / receive).

Recordings

Record the user locations for the ARCADIS system (location in the hospital / Room No.
/ Room designation) defined by the customer. See the next page.
Record the functionality of the WLAN network connection at the specified user loca-
tions for the ARCADIS system. See the next page.

Handover to the Customer

Hand the documents (Operator Manual) included in the shipment over to the customer.
Inform the customer that a parallel WLAN network connection and cable network con-
nection are not possible. Also inform the customer about the WLAN Client network
switch.
Siemens
Medical Solutions
The ground wire resistance may not be below 0.2 Ohm.
NOTE
In difficult WLAN network connections, you can again shut
down the Syngo application and log on to the WEB server for
the WLAN Client using Internet Explorer. After selecting the
<WLAN> - <Signal> menu, read the quality of the WLAN net-
work connection. Here, operate the "Stand-alone" monitor
carriage. The monitor carriage can then also be moved eas-
ier in the room.
Inform the customer of all bad or of individual bad WLAN network connections
that have been specified by the customer as user locations. Please record any
corrective measures discussed with the customer, for example improvements
made to the WLAN network topology, in the Comments lines.
DRAFT 22.04.2008
SP00-000.814.09.01.02
11.07
Page 71 of 78
CS PS SP
71
3.2
0
0
0
0
ARCADIS

Advertisement

Table of Contents
loading

Table of Contents