Appendix C. Default Configuration Profiles; Table C-1. User Profiles - ADTRAN DSU III AR User Manual

Default Configuration Profiles
Appendix C
DEFAULT CONFIGURATION PROFILES
The DSU III AR contains four different user profiles (Table C-1) or
sets of configurations options stored in read-only memory (see
Table C-2 on page C-2). The unit is shipped from the factory with
profile 1 loaded into the nonvolatile configuration memory. See
Chapter 2, Installation on page 2-1 and Chapter 9, Manual Command
on page 9-1 for more information.
User Profile
61202011L1-1
Profile 1 is configured for a 56 kbps, synchronous,
1
point-to-point or dial up operation with a V.35 con-
nector.
Use profile 2 for a 56 kbps, synchronous, point-to-
2
point or dial up operation with an EIA-232 connec-
tor.
Use profile 3 for a SW56, asynchronous operation
3
with CS and CD forced on.
Use profile 4 for a SW56 operation with DTR idle
4
when off.
DSU III AR User Manual

Table C-1. User Profiles

Description
C-1