EIA Local Loopback
The EIA LLB (Electronics Industries Association Local Loopback)
option specifies whether the DSU III AR responds to the LLB input
from the DTE. The factory default setting is D
shows the menu path used to access the EIA LLB option.
1= LOCAL
3=CONFIG
2= REMOTE ENTER ADDRESS
Table 7-3 shows the equivalent AT commands for setting the
EIA LLB options.
61202011L1-1
1= NETWORK OPT.
2= DTE OPTIONS
3= TEST OPTIONS
4= DIAL OPTIONS
5= MANUAL
Figure 7-3. EIA Local Loopback Options
Table 7-3. EIA Local Loopback AT Commands
Front Panel
AT Command
1=DISABLED
_A0
2=ENABLED
_A1
DSU III AR User Manual
Chapter 7. Configuring Test Options
. Figure 7-3
ISABLED
1= TEST TIMEOUT
2= RDL/EN /DIS
3= EIA LLB /EN /DIS
1= DISABLED
4= EIA RLB /EN /DIS
2= ENABED
Description
EIA LLB disabled
EIA LLB enabled
7-3