Chapter 11. Testing and Troubleshooting
Loop Only (RT)
The L
portion of the DTE interface for the local DSU III AR to be tested
from the remote site over the actual communication circuit.
Figure 11-7 illustrates the loopback point and the signal paths for
this test.
DTE
Interface
Test Purpose
The L
11-14
O
(RT) test allows the loop interface and a major
OOP
NLY
LOCAL
DSU/CSU
DTE Tx
DTE Rx
O
test is used to provide a loopback for network tests.
OOP
NLY
DSU III AR User Manual
NET Tx
NET Rx
Figure 11-7. Loop Only Test
TELCO
61202011L1-1