Connector Type
The C
primary channel connectors is used to connect to the DTE. Figure
6-3 shows the menu path used to set the connector type. The
factory default setting is V.35. There are no AT commands available
to set the connector type.
1= LOCAL
3=CONFIG
2= REMOTE
ENTER ADDRESS
61202011L1-1
T
option is used to specify which of the
ONNECTOR
YPE
1= NETWORK OPT.
2= DTE OPTIONS
3= TEST OPTIONS
4= DIAL OPTIONS
5= MANUAL
Figure 6-3. Selecting the Connector Type
DSU III AR User Manual
Chapter 6. Configuring DTE Options
1=DTE RATE
2= CONNECTOR TYPE
3= DATA FORMAT
4= DTE CMD OPTION
5= TRANSMIT CLOCK
6= CS OPTIONS
7= ANTI-STREAM
8= CD OPTIONS
9=TR OPTIONS
A= SR OPTIONS
B= AUXILIARY PORT
1= RS-232
2= V.35
6-5