Table of Contents
Advertisement
6.4
Compliance with China Compulsory Certification
(CCC)
Introduction
Some products are required to comply with China Compulsory Certification (hereinafter referred to as CCC) if exported,
distributed, or sold to China. An outline of CCC is explained in this section. Mitsubishi Electric servo products are not subject
to CCC.
CCC mark
Outline of CCC
CCC is a system for product certification that has been in effect in China since August 2003, the purpose of which is to protect
consumers and ensure safety domestically in China. The certification system currently has five types of certification: safety,
electromagnetic compatibility (EMC), safety + EMC, fire-fighting equipment, and wireless LAN. Products subject to the
certification are allowed to be exported, distributed, or sold to China only if they are certified by this system.
Products that have received certification proving compliance with the relevant technical standards (or products declared by
the manufacturer as being compliant) must carry the specified mark (CCC mark). Many of the technical standards to be
applied are GB standards (Chinese national standards), which comply with global standards such as those set forth by the
IEC (International Electrotechnical Commission) and CISPR (International Special Committee on Radio Interference).
As part of the State Administration for Market Supervision and Administration Announcement No. 18 of 2020 ("Announcement
on the Catalogue of Compulsory Product Certification" (April 21, 2020)), a revised list of products subject to CCC certification
(2020 version) has been published. Simultaneously, CCC Product Certification List No. 45 of 2014 (CNCA Notice No. 45 of
2014) was repealed.
Judgment
17 product groups divided into 103 categories are specified as the subject products (announcement No. 18 of 2020). The
following table shows the judgment rendered regarding the CCC compliance requirement for servo products.
Product
AC servo amplifier
*1
AC servo motor
*2
Options
*1 AC servo motors are included in the list of low-power motors (small motors 750 W or less) in the list of products subject to compulsory
certification, but are not subject to certification requirements for the following reason.
Explosion proof motors and controlled motors (servo motors, stepping motors, etc.) are excluded from the subject small capacity motors.
*2 Mitsubishi Electric option cables use the wires that is not classified into the cable category in the catalog.
Judgment
Not subject
Not subject
Not subject
6 COMPLIANCE WITH GLOBAL STANDARDS
6.4 Compliance with China Compulsory Certification (CCC)
6
69
Advertisement
Table of Contents
