Mitsubishi Electric MR-J5D-G-N1 User Manual page 61

Single-step Feed
This function enables test operation in accordance with the point table. Configure the settings of the point table operation in
advance. For the point table operation, refer to "POSITIONING MODE (POINT TABLE METHOD) (CP)" in the following
manual.
MR-J5 User's Manual (Function)
(1)
(2)
No. Item
(1) Point table No.
(2) Operation
Screen operation
Specify the point table number to be operated.
The servo motor can be started (CCW/CW), paused, stopped, or forcibly stopped. Clicking "Operation Start"
starts the operation in accordance with the point table.
4 STARTUP
59
4.5 Test operation
4