Endpoint_Call_Control_Interface_Failure; Description; Severity Level And Trap Type; Cause - Cisco Signaling Interface H.323 User Manual

Troubleshooting

ENDPOINT_CALL_CONTROL_INTERFACE_FAILURE

Description

An individual call failure has occurred. This informational event is reported to the management interface
and can be obtained with SNMP.

Severity Level and Trap Type

The severity level is information. The trap type is 3.

Cause

The RADVision stack reports this alarm.
Troubleshooting
This is an informational event.
ENDPOINT_CHANNEL_INTERFACE_FAILURE
Description
An individual call failure has occurred. This informational event is reported to the management interface
and can be obtained with SNMP.
Severity Level and Trap Type
The severity level is information. The trap type is 3.
Cause
The RADVision stack reports this alarm.
Troubleshooting
This is an informational event.
Cisco H.323 Signaling Interface User Guide
5-12
Chapter 5 Troubleshooting Cisco HSI Alarms
OL-4806-01 Rev. A14