Mml Configuration Commands - Cisco Signaling Interface H.323 User Manual

Cisco HSI Configuration
HSI starts up, it attempts to read the active configuration, checks that the configuration has been verified,
and ensures that the checksum matches. If the active configuration is not verified or if the checksum is
faulty, the configuration reverts to using the $GWHOME/currentGW/etc/GWmain.conf file.
All configuration data that can be set in the system is defined in the Skeleton Configuration file (see
Appendix B, "Skeleton Configuration
types (strings or numbers), and defines whether the data is dynamic, static, or constant.

MML Configuration Commands

There are three types of MML configuration command:
•
•
•
For more information about MML configuration commands, see
Command Reference."
Parameter names used in MML commands are not case sensitive.
Note
Table 3-1
Command
prov-sta
prov-cpy
prov-stp
Table 3-2
Command
prov-add
prov-dlt
prov-ed
prov-rtrv
The configuration export command is prov-exp, which exports the currently provisioned configuration
of the Cisco HSI to a file.
Cisco H.323 Signaling Interface User Guide
3-2
Configuration session commands that work with entire provisioning data files (see
Configuration component or parameter commands that perform actions on components or
parameters affecting a specific data file (see
Configuration export commands
Configuration Session Commands
Configuration Component or Parameter Commands
File"). The Skeleton Configuration file defines the data names and
Table 3-2)
Description
Starts a provisioning session to create a new configuration or modify
an existing configuration
Activates the configuration settings in the current provisioning
session
Terminates the provisioning session and saves the configuration
Description
Adds a component to the Cisco HSI
Deletes a provisioned component
Modifies a provisioned component
Retrieves information about an existing provisioning session
Chapter 3 Provisioning the Cisco HSI
Table
Appendix A, "MML User Interface and
OL-4806-01 Rev. A14
3-1)