Clr-Alm; Clr-Meas - Cisco Signaling Interface H.323 User Manual

Appendix A MML User Interface and Command Reference

clr-alm

The clr-alm command clears an alarm event.
Syntax Description
alarm event
Usage Guidelines
The alarm category must match the format shown in the alarm when the rtrv-alms command displays
it. It is case sensitive.
Examples
This example clears the alarm event VSC_FAILURE.
gw mml> clr-alm:event=VSC_FAILURE
GW Signaling Interface
M
mml>
Related Commands Command
ack-alm
rtrv-alms

clr-meas

The clr-meas command resets a measurement counter.
Syntax Description counter group
measurement name
OL-4806-01 Rev. A14
clr-alm:event=alarm event
The alarm event name or the text that appears in the body of the alarm.
Alarm names are defined in
Alarms."
2000-12-05 14:19:22
SUCC
Description
Acknowledges that an alarm event is recognized but does not clear the
alarm.
Displays all active alarms
clr-meas:counter group:name=measurement name
clr-meas:counter group
Valid counter groups are:
•
•
•
For a list of measurement names, see
Chapter 5, "Troubleshooting Cisco HSI
RAS
Q931
H245
Cisco H.323 Signaling Interface User Guide
Table 4-1, Table 4-2, and Table
clr-alm
4-3.
A-9