Cisco Signaling Interface H.323 User Manual page 176

OVLDLEVEL2FILTER
"NORMAL"
OVLDLEVEL2THRESHUPPERCPU
OVLDLEVEL2THRESHLOWERCPU
OVLDLEVEL2THRESHUPPERCALLS
OVLDLEVEL2THRESHLOWERCALLS
OVLDLEVEL3PERCENT
OVLDLEVEL3FILTER
Default: "NORMAL"
OVLDLEVEL3THRESHUPPERCPU
OVLDLEVEL3THRESHLOWERCPU
OVLDLEVEL3THRESHUPPERCALLS
OVLDLEVEL3THRESHLOWERCALLS
###################################################################################
##
#
Package = SYS_CONFIG_STATIC
#
# Call Control
# For the H323 cause code values see ITU-T: Q.850
# The default cause codes, used when there is no map entry for a received cause
CC_EC_DEFAULT
CC_HC_DEFAULT
#
# Unassigned Eisup cause codes
#
CC_EC_AccessBarred
CC_EC_Acknowledgement
CC_EC_AddressIncomplete
CC_EC_AnonymousCallRejection
Cisco H.323 Signaling Interface User Guide
C-16
Appendix C
= "NORMAL" #Choice {"NORMAL", "ALL"}. Default:
= 80 #Default: 100
= 70 #Default: 100
= 2200 #Default: 1000
= 2000 #Default: 1000
= 90 #Default: 0
= "NORMAL" #Choice {"NORMAL", "ALL"}.
= 95 #Default: 100
= 85 #Default: 100
= 2400 #Default: 1000
= 2300 #Default: 1000
= CC_EC_NormalUnspecified
= CC_HC_NormalUnspecified
= CC_HC_DEFAULT
= CC_HC_DEFAULT
= CC_HC_DEFAULT
= CC_HC_DEFAULT
Example of an HSI Configuration File
OL-4806-01 Rev. A14