Cisco Signaling Interface H.323 User Manual page 167

Appendix C Example of an HSI Configuration File
# CC: Call Control, EC: Eisup Cause, HC: H323 Cause
# For the H323 cause code values see ITU-T: Q.850
# The mappings below are considered constant and not provisionable.
# They can be made provisionable by moving them from the CCPackage
# to the SYS_CONFIG_STATIC package.
# The following is the Eisup to H323 cause code map.
# When the Eisup cause on the left is received from Eisup,
# the H323 cause on right is sent to H323.
# Note: the reverse is not true, this is a one way mapping.
#
CC_EC_UnallocatedNumber
CC_EC_NoRouteToTns
CC_EC_NoRouteToDest
CC_EC_SpecialInformationTone
CC_EC_MisdialledTkPrefix
CC_EC_ChUnacceptable
CC_EC_CallAwardedDeliveredEstCh
CC_EC_Preemption
CC_EC_PreemptionCctRes
CC_EC_NormalClearing
CC_EC_UserBusy
CC_EC_NoUserResponding
CC_EC_NoAnswerAlertedUser
CC_EC_SubAbscent
CC_EC_CallRejected
CC_EC_NumberChanged
CC_EC_RedirectionToNewDest
CC_EC_RoutingError
CC_EC_NonSelectedUserClearing
CC_EC_DestOutOfOrder
CC_EC_InvalidNumberFormat
CC_EC_FacilityRejected
CC_EC_ResponseToStatusEnquiry
OL-4806-01 Rev. A14
The H323 to Eisup cause map is defined further down.
= CC_HC_UnallocatedNumber
= CC_HC_NoRouteToSpecifiedTransitNetwork
= CC_HC_NoRouteToDestination
= CC_HC_SendSpecialInformationTone
= CC_HC_MisdialedTrunkPrefix
= CC_HC_ChannelUnacceptable
= CC_HC_CallAwardedEstablishedChannel
= CC_HC_Preemption
= CC_HC_PreemptionCircuitReservedForReuse
= CC_HC_NormalCallClearing
= CC_HC_UserBusy
= CC_HC_NoUserresponding
= CC_HC_NoAnswerFromAlertedUser
= CC_HC_SubscriberAbsent
= CC_HC_CallRejected
= CC_HC_NumberChanged
= CC_HC_RedirectionToNewDestination
= CC_HC_ExchangeRouteError
= CC_HC_NonSelectedUserClearing
= CC_HC_DestinationOutOfOrder
= CC_HC_InvalidNumberFormat
= CC_HC_FacilityRejected
= CC_HC_ResponceToStatusEnquiry
Cisco H.323 Signaling Interface User Guide
C-7