Prov-Rtrv - Cisco Signaling Interface H.323 User Manual

prov-rtrv

Related Commands Command
prov-add
prov-cpy
prov-dlt
prov-ed
prov-rtrv
prov-sta
prov-stp
prov-rtrv
The prov-rtrv command retrieves information about an existing provisioning session.
The prov-rtrv:list command is the only prov-rtrv command that can be executed outside of a
Note
provisioning session. Use the prov-sta command to start a provisioning command.
Syntax Description
name
MML name
all
session
list
Cisco H.323 Signaling Interface User Guide
A-18
prov-rtrv:name=MML name
prov-rtrv:all
prov-rtrv:session
prov-rtrv:list
The MML name for the elements that you want to display.
The MML component name for the component you want to display. Valid
MML names are:
•
•
•
•
•
•
Displays all components that have been provisioned.
Displays information about the provisioning session.
Provides a list of possible session names that you can use as the srcver
parameter to prov-sta:srcver=uk9,dstver=uk10.
Appendix A
Description
Adds a component.
Activates the configuration settings in the current provisioning
session.
Deletes a provisioned component.
Modifies a provisioned component.
Retrieves information about an existing provisioning session.
Establishes a provisioning session.
Terminates either a specified provisioning session or the current
provisioning session.
sys_config_static
sys_config_dynamic
h323_sys
ras
h245
q931
MML User Interface and Command Reference
OL-4806-01 Rev. A14