Prov-Ed - Cisco Signaling Interface H.323 User Manual

prov-ed

Command
prov-rtrv
prov-sta
prov-stp
prov-ed
The prov-ed command modifies a provisioned component.
Note
Syntax Description MML name
param name
param value
Usage Guidelines
To change more than one parameter, enter additional param name=value descriptions on the command
line. See
associated values.
Examples
Use the MML command shown in the following example to edit a provisioning element with the MML
name ras, parameter name maxFail, and value 7:
gw mml> prov-ed:name=ras,maxfail=7
H323 Signaling Interface Sun Jan 7 15:22:02 2001
M SUCC
Successfully edited provisioning element(s):
MML Name : ras.
Parameter: maxFail.
Value : 7.
Cisco H.323 Signaling Interface User Guide
A-16
prov-ed:name=MML name,param name=param value,...
Enter only those parameters that must be modified.
MML name for the element you are modifying. Valid MML names are:
•
•
•
•
•
•
The name of a valid configuration parameter for the specified name.
The value you want to assign to the parameter.
Chapter 3, "Provisioning the Cisco HSI,"
Appendix A
Description
Retrieves information about an existing provisioning session.
Establishes a provisioning session.
Terminates either a specified provisioning session or the current
provisioning session.
sys_config_static
sys_config_dynamic
h323_sys
ras
h245
q931
for a list of MML names, parameter names, and their
MML User Interface and Command Reference
OL-4806-01 Rev. A14