Advertisement
7-2. MEMORY OF THE SELF-DIAGNOSIS HISTORY AND THE SUPPLEMENTARY DATA
This is effective only in Service Mode 3, 4, 5.
(1) Error Number and Supplementary Data
The Supplementary Data for each Error number are memorized.
Memory No.
Reason
(Error No.)
2*
An
error
(Refer
to
Adjustment
Note:)
80
An exceptional ejection depends on a Error
18
Detection
constant tape running
17
Detection
constant tape running
16
Detection of the Cylinder lock during the
constant rotation
15
S-reel pulse cannot be detected when a
cassette tape is inserted.
(Error of the S-reel system or the Capstan
system.)
14
An exceptional detection of the DOWN
position during the unloading.
08
The recording circuit is operated in except
for REC mode.
07
The recording circuit can not be operated in
REC mode.
06
Mechanism lock during the Cassette-up.
05
S-reel pulse cannot be detected when a
cassette tape is inserted.
(Error of the S-reel system or the Capstan
system.)
04
Mechanism lock during unloading
03
Mechanism
unloading and the cassette-up.
02
The CAP FG could not be detected.
01
The cylinder could not be started.
(Error of the cylinder or the cylinder driver.)
11
Cylinder clogs during the PLAY mode.
10
Dew detection.
* Details of "VCR mode" of the Supplementary Data (These values are hexadecimal indication)
0: STOP, 1: EJECT, 2: REW, 3: FF, 4:REV, 5: CUE, 6: SLOW, 7: POWEROFF, 8: PLAY, 9: STIL,
A: REC, B: REC PAUSE, C: ADUB, D: ADUB PAUSE, E: INSERT, F: INSERT PAUSE
Note: 2* is as follows.
F20
NG1 in the PG Shifter Automatic Adjustment
(The cylinder rotation is unstable during the automatic adjustment.)
F21
NG2 in the PG Shifter Automatic Adjustment
(The vertical sync signal is lacked while over 5 seconds on the alignment tape.)
F22
NG3 in the PG Shifter Automatic Adjustment
(The installing position of Heads to the cylinder is our of specification.
F23
NG4 in the PG Shifter Automatic Adjustment
(The servo is not locked to the cylinder for more than 10 sec.)
while
the
PG
Automatic
of
T-reel
lock
during
of
S-reel
lock
during
lock
during
without
Supplementary Data
Data 1
VCR mode
VCR mode
the
VCR mode
the
VCR mode
VCR mode
VCR mode
No Data
VCR mode
VCR mode
VCR mode
VCR mode
VCR mode
the
VCR mode
VCR mode
VCR mode
VCR mode
VCR mode
39
(Sample)
Data 2
No Data
Reason of Ejection
Tape position
Tape position
Tape position
Counted value of S-reel pulse
No Data
No Data
No Data
Stand-by position
Tape position
Stand-by position
Stand-by position
No Data
No Data
No Data
No Data
Advertisement
