Advertisement
Phase Adjustment
Take-up Loading Arm Gear
(10) Set the Concave portion of Take-up Loading Arm Gear to
the position shown in Fig.A19.
Concave portion of Take-up Loading Arm Gear
(11) Install the Main Lever so that the convex portion on rear
side of the Main Lever (Fig.A21) is fitted into the concave
portion of Take-up Loading Arm Gear (Fig.A19), and
install the Cut Washer as shown in Fig.A22.
Supply Loading Arm Gear
Fig.A18
Fig.A19
NOTE:
When install the replacement parts; apply the Floil
Grease (VFK1298A).
Main Lever
Convex portion on rear side of the Main Lever
19
a) Inside
b) Outside
Fig.A20
Fig.A21
Cut Washer
Fig.A22
Advertisement
