Advertisement
(17) Install the Main Cam Gear so that the Phase Adjustment
Hole of Main Cam Gear is met with the hole of Chassis,
and install the Cut Washer.
NOTE:
When install the replacement parts; apply the Floil
Grease (VFK1298A).
Main Cam Gear
Phase Adjustment Hole
Cut Washer
(18) Install the Capstan Belt.
Fig.A29
Main Cam Gear
Fig.A30
Capstan Belt
Fig.A31
(19) Install the Supply Brake Arm Unit.
Supply Brake Arm Unit
(20) Install the Supply Reel Table.
(21) Install the Tension Arm Unit into the Tension Arm Boss.
NOTE:
When install the replacement parts; apply the Floil
Grease (VFK1298A).
Tension Arm Unit
21
Fig.A32
Supply Reel Table
Fig.A33
Fig.A34
Advertisement
