Advertisement
4-2. ASSEMBLY
ADJUSTMENT OF MECHANISM
NOTE:
When install the replacement parts to Chassis ;
apply the Floil Grease (VFK1298A).
AND
PHASE
Fig.A1
(1) Install the Loading Motor Unit not to scratch the Worm
Gear, and tighten the Screw for the Loading Motor Unit.
Loading Motor Unit
(2) Install the A/C Head Unit and tighten the Screw for A/C
Head Unit.
(3) Install the Capstan Motor Unit, and tighten 3 Screws for
the Capstan Motor Unit and 2 Screws for Stator.
NOTE:
When install the replacement parts; apply the Silicon
Grease (VFK1301) on IC0201 portion.
16
Worm Gear
A Screw for Loading Motor
Fig.A2
Screw
A/C Head Unit
Fig.A3
Applying portion
Fig.A4
Advertisement
