Advertisement
Sharp edge of Wiper Arm R
Sector Gear Hole
(32) Insert the convex portions of Side Plate R & L into the
grooves of Chassis.
Grooves of Chassis
(33) Tighten the 2 Screws.
Fig.A46
Convex portions
Fig.A47
2 Screws
Fig.A48
(34) Place the Mode Switch to EJECT position.
(35) Install the Mechanism Chassis onto the Main C.B.A., and
tighten three Black Screws and three Red Screws with
earth lead, and connect two Flexible Card Connectors
(Cylinder and A/C Head) and P1531.
Flexible Cad
Connectors
Tighten with
Earth Read
PHASE ADJUSTMENT OF P4 CAP
(36) Adjust the P4 Cap so that the Direction of P4 Cap is on
y-axis with tolerance ± 5 °.
24
Fig.A49
3 Red
Screws
P1531
3 Black Screws
Fig.A50
y
± 5°
x
P4 Cap
Fig.A51
Advertisement
