Advertisement
(12) Push the Main Lever leftward to adjust the phase so that
the hole of Main Lever is met with the hole of Chassis as
shown in Fig.A16.
Phase Adjustment
(13) Install the Change Lever into the aperture of Change
Gear.
NOTE:
When install the replacement parts; apply the Floil
Grease (VFK1298A).
Change Lever
Change Lever Unit
Hole
Fig.A23
Fig.A24
Change Gear
Fig.A25
(14) Install the Change Gear Spring through the shaft for
Change Gear.
(15) Install the Center Clutch Unit and the Cut Washer.
Note:
Keep paying attention to do not lose the Change Gear
Spring and the Cut Washer.
(16) Install the Sector Gear Unit so that the Phase Adjustment
Hole of Sector Gear Unit is met with the Adjustment Hole
of Chassis.
20
Change Gear Spring
Fig.A26
Center Clutch Unit
Cut Washer
Fig.A27
Sector Gear Unit
Phase Adjustment Hole
Fig.A28
Advertisement
