Advertisement
4. DISASSEMBLY
METHOD FOR MECHANISM
4-1. DISASSEMBLY OF MECHANISM
(1)
Remove Take-up Brake Spring, Take-up Brake Arm and
Take-up Reel Table.
Take-up Reel Table
Take-up Brake Arm
Take-up Reel Table
(2)
Keep Pressing Supply Shaft Holder Unit, slowly turn
LED Prism clockwise up to 45° to remove.
Caution:
The LED Prism is made of soft material, handle with care
when removing.
(3)
Remove Idler Arm and Idler Gears.
/ASSEMBLY
Take-up Brake Spring
Fig.D1
Take-up Brake Arm Unit
Fig.D2
1
2
Turn clockwise
up to 45°.
Fig.D3
LED Prism
(4)
Remove Tension Spring
Tension Arm Spring
(5)
Unlock the Hooks of the boss on rear side of mechanism
chassis to remove the Tension Arm Unit, and remove
the Supply Brake Arm Unit and Supply Reel Table.
12
Idler Arm Unit
Idler Gear
Fig.D4
Fig.D5
Tension Arm Boss
Unlock
Unlock
Fig.D6
Advertisement
