Advertisement
f. Then unload again to remove the cassette tape as
shown in Sig.S7.
3. Removal by manual operations after removing the
Mechanism Unit.
a.
Disconnect the AC plug, and remove the Top Panel,
Front Panel and the Mechanism by referring the
Disassembly Procedures.
b.
Remove the Screw (S1) and remove the Loading
Motor both shown in Fig.S8.
Loading Motor
Screw (S1)
c.
Rotate the Main Cam Gear counter-clockwise
(Fig.S9) until just before the unloading would be
completed as shown in Fig.S3.
d.
Rotate the Capstan Motor clockwise (Fig.S9) to
remove the tape slacks as shown in Fig.S6.
Fig.S7
Fig.S8
Capstan Motor
Main Cam Gear
e.
Rotate the Main Cam Gear counter-clockwise again
(Fig.S7) to remove the cassette-tape as shown in
Fig.S8.
f.
Set the Position Switch to EJECT POSITION
certainly as shown in Fig.S10.
g.
Install the Loading Motor and tighten screw (S1) as
shown in Fig.S8.
10
Fig.S9
EJECT POSITION
Fig.S10
Advertisement
