2 Screws for Stator
Stator
(4) Install Pinch Charge Arm, P5 Arm Unit, Pinch Arm Unit
and Opener Piece in order.
NOTE:
When install the replacement parts; apply the Floil
Grease (VFK1298A).
NOTE:
When install the replacement parts; apply the Floil
Grease (VFK1298A).
3 Screws for Capstan Unit
Fig.A5
Capstan Unit
Fig.A6
Pinch Charge Arm
Fig.A7
Pinch Arm Unit
Fig.A8
Pinch Arm Unit
P5 Arm
Note:
Install the Spring of Pinch Arm Unit into the Hole of Pinch
Charge Arm as shown in Fig.A10.
(5) Install the Supply Shaft Holder Unit and Take-up Shaft
Holder Unit.
NOTE:
When install the replacement parts; apply the Floil
Grease (VFK1298A).
17
Opener Piece
Pinch Charge Arm
Fig.A9
Spring of the Pinch Arm Unit
Hole of the Pinch Charge Arm
Fig.A10
Supply Shaft
Holder Unit
Fig.A11